Green Energy

Product Specialty

SOREX WELDING electrode and wire design could provide low hydrogen, high deposition rate and impact toughness at low temperature. To fulfill offshore wind requirement, SOREX not only approved by various naval classification certificates (ABS, BV, CCS, CR, DNV-GL, KR, LR, NK, RINA PRS, JIS) but also approved by CPR-CE MARK.
 
Green Energy
 

Products Choice: Green Energy


Green Energy /Wind Farm

ProductProductAWSJISENGBApplication
SL-58SL-58A5.1
E7018
Z3211
E4918
ISO 2560-A
E 42 3 B 3 2
T5117
E5018
For 490N/mm2 H.T. steel of nuclear power station , petroleum chemical plants and heavy steel structures welding.
SLH-58SLH-58A5.1
E7018-1 H4
Z3211
E4918
ISO 2560-A
E 46 4 B 3 2 H5
T5117
E5018
For 490N/mm2 H.T. steel welding , excellent impact value at -45℃.
SS-309LSS-309LA5.4
E309L-16
Z3221
ES309L-16
ISO 3581-A
E 23 12 L R 1 2
T983
E309L-16
For low carbon 22%Cr-12%Ni stainless steel and dissimilar steels welding.
SFC-71SFC-71A5.20
E71T-1C/1M
Z3313 T 49 2
T1-1 C/M A-U
ISO 17632-A
T42 2 P C/M 1 H5
T10045
E501T-1/1M
For welding shipbuilding storage vessels , structural fabrication , machinery and piping etc.
SFC-71JSFC-71JA5.20
E71T-1C/M-J
Z3313 T 49 4
T1-1 C/M A-U
ISO 17632-A
T46 4 P C/M 1 H5
T10045
E501T-1L/1ML
Rutile-type FCW and excellent impact value at - 40℃.
SFC-71MSFC-71MA5.18
E70C-6C/6M
Z3313 T 49 4
T15-0 C/M A-U
ISO 17632-A
T42 4 M C/M 3 H5
--Mixed gas Rutile-type FCW . Good weldability on all-position and excellent impact value.
SFC-81Ni1SFC-81Ni1A5.29
E81T1-Ni1C
Z3313 T 55 3
T1-1 C A-N2
ISO 17632-A
T46 3 1Ni P C 1 H5
T17493
E551T1-Ni1
For 590N/mm2 H.T. steel welding.
SFC-81K2SFC-81K2A5.29
E81T1-K2C
Z3313 T 55 6
T1-1 C A-N3
ISO 17632-A
T46 6 1.5Ni P C 1 H5
T17493
E551T1-K2
Good notch toughness can be obtained at -60℃.
SFC-81MSFC-81MA5.28
E80C-G
--ISO 17632-A
T46 6 Z M C/M 3 H5
--It is widely used for flat and horizontal fillet welding in shipbuilding, bridges, vechicle, machinery and structural fabrication etc.
SFC-309LSFC-309LA5.22
E309LT1-1
Z3323
TS309L-FC1
ISO 17633-A
T 23 12 L P C/M 2
T17853
E309LT1-1
For low carbon of 22%Cr-12%Ni stainless steel and welding for dissimilar steels.
SFC-2209SFC-2209A5.22
E2209T1-1
Z3323
TS2209-FC1
ISO 17633-A
T 22 9 3 N L P C/M 2
T17853
E2209T1-1
For welding alloy 2205 duplex stainless steel with resistance to pitting corrosion and crack.
SMG-60SMG-60A5.28
ER80S-G
Z3312
G 55 A 3 U C 3M1
ISO 16834-A
G 55 3 C Z
T8110
ER55-G
High welding current . It suits for 590N/mm2 H.T. steel.
SMG-60NSMG-60NA5.28
ER80S-G
--ISO 14341-A
G 46 6 C/M Z H5
--It is used for welding high tensile strength steel,such as steel construction, pressure vessels, vehicles and bridges.
SF-65
SW-M12K
SF-65
SW-M12K
A5.17
F7A2-EM12K
Z3183
S502-H
756 S 38 2
AB S2Si
T5293
F5A3-H08MnA
For single pass or multiple passes welding for mild steel and 490N/mm2 steel used in steel structure , shipbuilding , bridges , pressure vessel.
SF-66
SW-M12K
SF-66
SW-M12K
A5.17
F7A4/P4-EM12K
Z3183
S502-H
--T5293
F5A4/P4-H08MnA
For single pass or multiple passes welding for mild steel and 490N/mm2 steel used in steel structure , shipbuilding , bridges , pressure vessel.
SF-66
SW-H12K
SF-66
SW-H12K
A5.17
F7A6/P6-EH12K
--ISO 14171-A-S
46 5 AB S3Si
--For single pass or multiple passes welding for mild steel and 490N/mm2 steel used in steel structure , shipbuilding , bridges , pressure vessel.
SF-66
SW-60G
SF-66
SW-60G
A5.23
F8A8-EG-G
--ISO 14171-A-S
46 6 FB SZ
--For single pass or multiple passes welding for mild steel and 490N/mm2 steel used in steel structure , shipbuilding , bridges , pressure vessel.